Quality Crystals from Fil-Tech.
Longer Life Gold and Alloy Quartz Crystals provide monitoring for deposition of low stress materials to high stress dielectrics.
4 different electrode materials.
Can replace Inficon, Balzers type Crystals and others.

Pneumatic Ink Cartridges (DM-2 & DM-2.3)
Electric Ink Cartridges (DM-1, DM-1.25 & DM-S)

Cartridge Types :
DM-1 Nylon monofilament (5 mil also with tungsten wire), 0.75" straight needle

DM-1.25 Nylon monofilament, 1.25" straight needle

DM-S Curved needle, nylon monofilament outline drawing

DM-2 Pneumatic, 0.50" needle, Teflon tube (no filament)

DM-2.3 Pneumatic, 0.30" needle, Teflon tube (no filament)

DieMark Ink Remover 8000 is designed specifically for the semiconductor industry.
It contains very low levels of organic and inorganic contaminants.

It is non-carcinogenic, non-teratogenic and all ingredients are TSCA listed.
DieMark® Ink Remover 8000 thoroughly cleans a variety of inks (all inks sold by Xandex) including oven baked dots, via simple bench top methods.
DieMark® Ink Remover 8000 may also be used in ultrasonic or circulating baths.
This product accommodates other unique wafer cleaning methods such as step temperature and pressure cycling.

Glycol ethers are used to dissolve dyes and resins for the manufacture and removal of inks.
Some are extremely toxic at low quantities, and rated as carcinogenic and teratogenic (reproductive hazard).
Glycol ether substitutes are solvents with similar characteristics, which provide the same effect without the toxic, carcinogenic or teratogenic characteristics of glycol ethers.
Because of these facts, Xandex has developed this remover to be glycol ether free.

Electric Inking systems deposit ink dots through actuation of a solenoid,
which in turn moves the DieMark cartridge nylon filament up and down.
Filament movement draws ink down the filament from the cartridge reservoir to the wafer surface.
DieMark cartridge needle size, filament diameter, filament length, and ink viscosity are factory tuned.
A standard ink reservoir is combined with a variety of needle and filament configurations for different applications and dot sizes.

Pneumatic Inking systems incorporate the convenience of DieMark disposable ink cartridges with
the reliability of a microprocessor-controlled pneumatic dispensing system for the ultimate inking solution.
Ink dots are deposited via pneumatic actuation of the inker shuttle mechanism and a simultaneous pulse of air into the cartridge reservoir.
There is no filament and no direct contact with the wafer surface.

Evaporation Boats are capable of depositing a wide variety of materials.
The R. D. Mathis Company offers an extensive selection of standard tungsten boats,
tantalum boats and molybdenum boats as well as custom fabrication to meet your specific evaporation source needs.
All of our evaporation boats are available in a variety of materials and thicknesses.

Evaporation materials, Tungsten evaporation source filaments,
Evaporation box sources and Evaporation source crucibles and heaters are also available from R.D. Mathis Company.